WHAT YOU WILL NEED
-Empty oatmeal container
-Scissors
-Pencil/pen/marker {whichever you prefer}
-Measuring tape
-Spray paint
-Hair piece or elastic thread
-Hot glue gun and glue
OPTIONAL
-Gems
-Faux fur trim
-Metallic rope trim
-Scrapbook letters
-Felt
{These are all the things I used to decorate our crowns. See images at bottom of this post}
Step 1: Foundation of the Crown
*First, you will need an oatmeal container - I used the smallest size. Empty and dust it out. I used the top of the cylinder {the side that did not have the bottom closed seal} to be the placement of what would go directly onto the head since it is already a perfect, smooth, even shape.
*Pop off the bottom closed seal of the container. This is where you will cut down away the pieces. Now that your cylinder is ready, begin your measurements.
*Take your measuring tape and get the full circumference, divide that number into 4, i.e. if the total circumference is 12" divide it by 4 and you have 3". With the measuring tape, mark a small dot every "3 inches" {or whatever your measurements are} close to the base of the cylinder.
*Depending on how tall you want your crown, the peaks will vary to your ideal size. On the new dots you just made, measure from the base up to the desired hight of your peak {my measurements were 3.5" from the base to the highest peak for the birthday crown. Note, if you are adding fur trim, it can add height to the crown} and mark that with a small dot. You can do a different color if it helps you stay organized. You have just made the peaks of your crown.
*Now you will need to make the valleys of the crown. If your peaks were 3" apart you will now need to divide that number in half which would be 1.5". Go in between each peak and place a dot with that distance on the base of the cylinder. Again measuring from the base up, you will now need to decide how thick the overall crown will be {the birthday crown is 1 5/16" from the base to the valley}. Mark that new height.
*You should now have 8 dots total for the valleys and the peaks and 8 dots on the base. With a ruler or measuring tape, connect the two dots to create V like shapes. Are you seeing it yet? Now with the best pair of scissors you have go ahead and cut out along the line.
This is what your container should look like before cutting
Step 2: Painting
*You have completed the foundation of your crown and the decorating can begin. Spray paint whatever color you want and let it dry completely for about 15 min. I used prongs to hold the crown while spray painting to help get the whole thing sprayed. Be sure you spray paint the inside as well. People will be able to see that too. Continue decorating as you imagined!
Step 3: Adding Attachments
Now to make the the crown stick to the head, I did two different attachments, one with an elastic thread and one with a comb/hair piece. Both will require the hot glue gun.
*Elastic Thread; Measure the length you want for your crown and on the side exactly 90 degrees from the center front, hot glue the end of the thread to the inside of the crown. Hot glue a nice size bead of glue and either wait and hold that elastic there until the glue dries completely or you can add a decretive piece of scrapbook-ness {I had little golden hearts that were made of a really thick cardboard} to hide the bead of glue. I also think that adds a more secure finish. Do the same to the other end of the thread directly across {180 degrees}.
This is the elastic thread with decretive finish to hide the glue beads.
I am not proud of how the faux fur trim looks on the inside... don't judge!!!
*Hair Piece; If you would like to do a hair piece, it is a little more difficult because the two are not the same shape. I used felt to help with the different curves. At center front of the crown, I hot glued a piece of felt the same length as the hair piece. I then hot glued felt on to the hair piece. Once they were both done drying, I hot glued the two felts together. With a lot of pressure, I secured the two together. Be sure you are not placing the hair piece too high in the crown, otherwise it will not be able to grip onto the hair.
This is what my hair piece attachment looked like
If you want to keep your crown for a long time I recommend finding a box to keep it in. I used an old shoe box from Ekemona's pair and it worked out perfectly!!! I decided to decorate it as well.
Now you are done and ready to go!!! Please take pictures and send them to me!!! I would love to see all the different kinds of crowns people make!
Princess Peach Crown and the Birthday Crown {our family tradition}





















































